Sources of System T 2BA rivnuts

Does anyone know of a source of 2BA rivnuts as used by ParkWard. Or do we give up and use the nearest metric equivalent? Posted by vaningen 23/05/2012 18:59:10

hello, You can get rivnuts in a UNF thread in sizes 6-32, 8-32 and 10-32 from LAS Aerospace see <!-- w --><a class="postlink" href="http://www.lasaero.com">www.lasaero.com</a><!-- w --> but not in the BA. They are also a good source of BA and UNF bolts which are all Aero grade and Cad plated . Hope this helps, saves using metric. Ken Posted by Ken Fern 24/05/2012 08:00:20

Hello Vaningen &amp; Vaningen, You can use M5 Rivnuts,and run a 2BA Tap through them,you then do not have to worry about mixing thread types! Chris. Posted by Buckingham 16/06/2012 06:07:34

Hi Just found these <!-- m --><a class="postlink" href="http://www.johncraddockltd.co.uk/land-rover-parts/79239-nut-sert-2ba-rivnut-.html">http://www.johncraddockltd.co.uk/land-r ... vnut-.html</a><!-- m -->  Just wondering where this is used on the TD Posted by paddysteel7 17/02/2015 20:02:04