I have been very busy for a few weeks now doing all the little jobs..... the throttle linkage was one job that took a bit of time but some spherical joints did the job. I made the pedal from an old hinge and some bent sheet metal with a nice rubber covering. After much thinking I went for pedal right and re bent the brake pedal to suite. I will need to make some clever lever bits to allow the steering wheel speed controller to work efficiently too. The radiator shroud needed the upright piece for the filler re making... I traced the shape and cut it out before silver soldering it up and soft soldering the whole lot in.... doesn't look too bad I think! Posted by FLYJCW 28/06/2019 16:34:32
0